Important: Read this before posting to this forum
- This forum is for questions related to the use of Apollo. We will answer some general choice modelling questions too, where appropriate, and time permitting. We cannot answer questions about how to estimate choice models with other software packages.
- There is a very detailed manual for Apollo available at http://www.ApolloChoiceModelling.com/manual.html. This contains detailed descriptions of the various Apollo functions, and numerous examples are available at http://www.ApolloChoiceModelling.com/examples.html. In addition, help files are available for all functions, using e.g. ?apollo_mnl
- Before asking a question on the forum, users are kindly requested to follow these steps:
- Check that the same issue has not already been addressed in the forum - there is a search tool.
- Ensure that the correct syntax has been used. For any function, detailed instructions are available directly in Apollo, e.g. by using ?apollo_mnl for apollo_mnl
- Check the frequently asked questions section on the Apollo website, which discusses some common issues/failures. Please see http://www.apollochoicemodelling.com/faq.html
- Make sure that R is using the latest official release of Apollo.
- Users can check which version they are running by entering packageVersion("apollo").
- Then check what is the latest full release (not development version) at http://www.ApolloChoiceModelling.com/code.html.
- To update to the latest official version, just enter install.packages("apollo"). To update to a development version, download the appropriate binary file from http://www.ApolloChoiceModelling.com/code.html, and install the package from file
- If the above steps do not resolve the issue, then users should follow these steps when posting a question:
- provide full details on the issue, including the entire code and output, including any error messages
- posts will not immediately appear on the forum, but will be checked by a moderator first. This may take a day or two at busy times. There is no need to submit the post multiple times.
speedTest function in multiple cores
speedTest function in multiple cores
I established a mixed logit model and about 20 random parameters are set. when I use 1000 MLHS draws for these parameter, the model runs a very long time, about several days. therefore, I use the speedTest function to explore the most suitable number of cores and the seconds used in likelihood calculation keep little changed since the 3 cores, no matter the draws are 500, 1000. Does it mean 3 cores is are the most suitable cores' number? I do not understand it, because I have so many random parameters and draws and in my mind, more cores lead higher model estimation speed.
-
- Site Admin
- Posts: 1042
- Joined: 24 Apr 2020, 16:29
Re: speedTest function in multiple cores
Hi
yes, this suggests that 3 cores is a good number to use. The benefits of multiple cores might decrease if you use too many cores
Stephane
yes, this suggests that 3 cores is a good number to use. The benefits of multiple cores might decrease if you use too many cores
Stephane
Re: speedTest function in multiple cores
Hi Stephane,
the running time is so long now, if i want to speed up it, what method could help it? i can apply for using supercomputer of my university, but I do not know if it will work.
Best,
Qiang
the running time is so long now, if i want to speed up it, what method could help it? i can apply for using supercomputer of my university, but I do not know if it will work.
Best,
Qiang
-
- Site Admin
- Posts: 1042
- Joined: 24 Apr 2020, 16:29
Re: speedTest function in multiple cores
yes, a faster computer will help